Paper tube is a special packaging material, but it is widely used in life. I believe everyone has seen it. Speaking of paper tube, then you may be unfamiliar with paper tube machine. Film Making Paper Tube Making Machine is divided into many types according to the characteristics of the paper tube it makes. It is widely used in all walks of life. Let’s learn about it together.
Film Making Paper Tube Making Machine Principle
Industrial paper tube making machine for film adopts CNC computer numerical control system, SMS synchronous mobile chasing cutting device, and imported servo drive. It can greatly reduce the resistance of the cutter to the paper tube during the cutting action, so that the gap of the produced paper tube is uniform.
The blade of industrial paper tube making machine for film adopts imported single-circular knife cutting design, and the full CNC drive cutter (non-cylinder drive) realizes accurate cutting. The transmission part of the paper tube machine is ultra-quiet design to improve work efficiency!
Film Making Paper Tube Making Machine Classification
Industrial paper tube making machine for film can be divided into spiral tube machine, flat tube machine, and pagoda-shaped tube machine according to the process of rolling paper tube.
Industrial paper tube making machine for film can be divided into: tube cutting machine, tube rolling machine, capping machine, precision cutting machine according to different uses.
Industrial paper tube making machine for film can be divided into: intelligent CNC spiral paper tube machine, program-controlled spiral paper tube machine according to the degree of intelligence.
Film Making Paper Tube Making Machine Features
It has a self-locking function, and the swing arm angle can be automatically locked without shaking after adjustment.
With automatic follow-cutting device, the incision is neat and without warping, and the cutting length can be adjusted by yourself. One to two people operate.
The paper tape with suitable quantitative and wide width is wound into a parallel spiral paper tube machine with the required inner diameter and wall thickness (the 38 type is particularly suitable for rolling small inner diameter, thin wall and thick paper tube).
It adopts three active stepless speed regulation drive rollers, the belt does not slip, the core shaft deformation is small, the belt pressure is large, the winding force is strong, the power transmission efficiency is high, the paper tube strength is good, and the surface is smooth.
Film Making Paper Tube Making Machine For Film
Tubes for chemical fiber industry: DTY tubes, POY tubes, FDY tubes, nylon tubes, spandex tubes, spandex coated yarn tubes;
Film industry: BOPP, PET, PVC, BOPA, CPP, agricultural mulch, cling film, wrapping film, plastic bag tubes (for supermarkets), aluminized film, electrical capacitor film, propylene film, cigarette film;
Tubes for printing industry: mainly used in roll drum printing, film printing, paper printing;
Tubes for papermaking industry: newsprint, tube paper, white board paper, fax paper, bill paper, tipping paper, aluminum foil paper, writing paper, colored parchment paper, cup paper, Tetra Pak cling paper, and others;
Leather industry: PU leather, carpet leather;
Tubes for food packaging: tea cans, potato chip cans, candy cans, salt cans, cake box tubes, etc.;
Film Making Paper Tube Making Machine
1. Wear personal protective equipment correctly.
2. During the operation of industrial paper tube making machine for film, safety inspections shall be carried out according to regulations, especially to check whether the fastened objects are loose due to vibration, so as to make reasonable policies.
3. Before operation, the paper tube machine equipment shall be inspected for safety, and it shall be put into use after empty operation.
4. It is strictly forbidden to operate the equipment with faults. Once a fault is found, it shall be handled immediately and it shall be seriously vigilant.
5. When the equipment is running, it is strictly forbidden to adjust it by hand, measure parts by hand, or lubricate, clean up debris, etc. It must be stopped before performing the above actions. When the equipment is running, the operator shall not leave the work station at will.
6. The tools, fixtures and processed parts used in industrial paper tube making machine for film must be firmly clamped and not loose.
7. After the work is finished, the switch shall be turned off, the tool and workpiece shall be pushed out from the working position, and the work site shall be cleaned up, the parts and workpieces shall be neatly arranged, and the hygiene of the paper tube machinery and equipment shall be cleaned up.